12v led battery tester
12V Car Battery Tester Analyzer Motorcycle Tester Fault Detector with 6 LED Lights Display Car Diagnostic Tool tester battery
12V LED Tricolor Indicator Light Digital Panel Voltmeter Electric Voltage Meter Volt Tester For Auto Battery Car Motorcycle Ship
Feature:
- Brand new and high quality
- Good overall performance, high impact strength, good heat and flame resistance
- With fixed bracket, suitable for installation and fixing of various car models
- High-quality LED wick, good brightness, full color, multi-color wick running bead design, visual display of different voltage states
- IPX6 waterproof level, meet the rainwater in the daily driving process of the locomotive
- Wiring instructions: the red wire is connected to the positive pole , and the black wire is connected to the negative
- Real time monitoring voltage to understand battery state
- If the voltage of locomotive is too low or too high,the battery condition of locomotive can be monitored in real time
Specification:
- Material:Plastic
- Power supply: DC12V
- Display Color: Blue, red, green
- Operating temperature: -10°C to 65°C
- Input impedance:100K
- Size:5.0cm/1.97inch x 2.8cm/1.10inch x 1.9cm/0.75inch.
Package Included:
- 1 x Motorcycle Volt Gauge Meter
NO Retail Box. Packed Safely in Bubble Bag.
QUICKLYNKS BM5 12V LED Battery Tester Volt & Amp Lead Acid Battery Tester Monitor BM5 Battery Analyzer Load Car Battery Checker
QUICKLYNKS 12V BM5 Battery Tester Volt & Amp Lead Acid Battery Tester Monitor
Operating Temperature | -40 - 90℃ |
Input Voltage | 6V-20V |
Current | 2.3mA |
Voltage Accuracy | ±0.03V |
Automotive Electronic Relay Tester Car Battery Checker LED Indicator Light Universal 12V Car Relay Tester
Welcome to our store !
We support dropshipping!
We will give priority to dropshopping orders within 48 hours!
- CNBJ-707 is a quick go/no-go tester relays that provides with indication of the general health and functioning of the most common Automotive relays. Tester will check for proper functioning of the relay contacts by connecting the car battery (11V--15V) to the relay coil. Tester will watch the pin configuration,the time to contacts closure and opening, consistency of the relay during each test session, Tester will light the GREEN LED if all passed during the test session,if not light the RED LED.
- 1. Connect the power leads to the car battery --black alligator clip to negative terminal, red alligator clip to positive terminal.
- 2. Tester is powered up when the LED illuminates in RED.
- 3. Check the relay before plugging into the tester. If it's a 4 pin relay,select"4 pin" on the tester.If it's a 5 pin relay, select"5 pin"on the tester.
- 4. Plug in the relay into one of the three receptacles.
- 5. Press the "TEST" button.
- 6. Tester will check the pin configuration of the unknown relay. Tester will light the RED LED if the unkonwn relay is not the same to the most of common automotive relaysor the pin of the unknown relay is destroyed.
- 7.Tester will open and close the relay 10 times for testing the time to contacts closure and opening if the pin configuration of the relay is right. Tester will light the RED LED immediately if the time is overtime.
- 8. Tester will check the consistency of the relay after testing the time to contacts closure and opening ten times. Tester will light the GREEN LED if the test passed, if not light the RED LED.
- 9. Disconnect power leads from the car battery and remove relay from the tester.
- 1. The car battery must be 12V battery, and the voltage of the battery is among 11V-15V.
- 2. Ideal for coil resistance above 20 ohms.
- 1 x Car Relay Tester
Do dropshipping ?
Yes,we do.If you have any question please contact us.
Production Material Safety?
All products are 100% brand new, workable and checked carefully before sending out.
When is the parcel sent?
We will send out order within 5 workdays. The delivery time will vary according to different countries and will be affected by weather, public holidays and so on. If order doesn't received in declare time, please contact us.
How about refund?
Full refund if the item does not match the description or defective.
ZB2L3 Battery Tester LED Digital Display 18650 Lithium Battery Power Supply Test Resistance Lead-acid Capacity Discharge Meter
12V Digital Battery Alternator Tester with 6 LED Lights Display Battery Testers with Brake Fluid Tester For Car Motorcycle
Brake Fluid Tester Description: 
KONNWEI KW208 Car Battery Tester 12V 100 to 2000CCA Cranking Charging Circut Tester Battery Analyzer 12 Volts Battery Tools
KONNWEI KW208 Car Battery Tester 12V 100 to 2000CCA Cranking Charging Circut Tester Battery Analyzer 12 Volts Battery Tools
KONNWEI KW208 12V car battery tester is able to effectively analyze and read important car data such as voltage, internal resistance, cold cranking amp and AH capacity, battery health and charge status. It provides accurate results, calculates the cold cranking capability of the battery and the aging extent, allowing for a quicker, more precise car repairing.
It provides techs or DTYer with a quick, simple and cost-effective solution to know the battery's charging status better , check the battery's health and detect faults.
Top reasons to Choose KW208 Car Battery Tester
1.[Multi-Functions]：KONNWEI KW208 Battery Tester includes Battery test, Cranking test, Charging test functions. Mainly targeted to analyze the battery healthy status. It directly detects whether the battery is good or bad, and present suggested solutions.
2.[Convenience] : No internal batteries required and gets the power directly from the 12V battery. And testing can be done by connecting electrodes.
3.[Professional]：Test standards include most battery standards in the world, CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE
4.[Efficiency & Safety]：Using advanced conductive technology, it can directly display the high accuracy results of vehicle info. Deigned with polarity reverse connection protection. It will not damage the device or affect the car or battery.
5.[Multi-language Support]：8 Languages are
available.Available in English, German, French, Dutch, Russian, Spanish, Italian ,Portuguese.
KONNWEI KW208 functions:
1..Test Result Good, Recharge or Replace
2.Capacity Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.
Internal resistance value (mΩ) and Life in percentage (%)
3.Cranking system and Charging system
4.Record and re-play battery data.
5.Battery test, cranking test, charging test and other additional functions.
6.The major battery standards CA,CCA,BCL,MCA,JIS,SAE,EN,DIN and IEC are supported
KONNWEI KW208 features:
1.【DATA READINGS】The KONNWEI KW208 12V car battery tester is able to effectively analyze and read important car data such as voltage, internal resistance, cold cranking amp and AH capacity, battery health and charge status.
2.【ACCURATE MEASUREMENTS】This professional automotive battery tester provides accurate results, calculates the cold cranking capability of the battery and the aging extent, allowing for a quicker, more precise car repairing.
3.【WIDELY COMPATIBLE】Beginner or expert, this car battery diagnostic tester can be used with a wide selection of 12V 100-2000 CCA regular flooded batteries, AGM flat plate, AGM spiral, as well as GEL batteries.
4.【EXTRA FEATURES】The KW208 car battery tester displays test results in text , displaying the real-time battery voltage. With an intelligent 2.4” backlit and STM32 main chip, reading access is practical and rapid!
How to use it?
Step 1. Connect the 12V battery, red clips to positive pole and black clips to negative pole.
Step 2. Battery Test: Firstly select the type of battery to be tested, then the test criteria and the test range, and then you have the results within few seconds.
Step 3. Cranking Test: After selecting the cranking test function, follow the prompts to start the engine. Test completed.
Step 4. Charging Test: After entering the charging test function, follow the prompt to increase the speed to 2500 RPM for 5 seconds, then press OK. Test completed.
KONNWEI KW208 support 8 languages:
English, German, French, Dutch, Russian, Spanish, Italian ,Portuguese
KONNWEI KW208 support measure standards:
Use a test a wide range of 12v batteries(Starting{SLI},Deep Cycled and Marine) of Wet(Flooded),VRLA or Maintenance Free (MF),Sealed Maintenance Free (SMF), Absorption Glass Mat(AGM),EFB and GEL Cell.
1.CCA:100-2000
2.BCI:100-2000
3.CA:100-2000
4.MCA:100-2000
5.JIS:26A17-24SH52
6.DIN:100-1400
7.IEC:100-1400
8.EN:100-2000
9SAE:100-2000
Software display:
Item pictures:
Package List
KW208 Battery Tester*1
Instruction Manual*1
Safe packing box *1
MICRO-200PRO Digital Car Capacity Battery Tester 12V 24V 40-2000CCA Motorcycle Battery Analysis and Automotive Tools
MICRO-200PRO 12V 24V 40-2000CCA capacidad Digital sistema de coche herramienta analizador camión motocicleta Auto probador de batería
La versión de idioma:
(1)Versión 1:Inglés, español, italiano, francés, alemán, polaco;
▶Batería de coche de 12V y batería universal de motocicleta de 12V
▶Prueba del sistema de baterías de 12V y 24V
▶Sistema de carga de prueba
▶A prueba de sistema
▶Indicador de estado de la batería de la pantalla
▶Cable de datos USB conectado al ordenador para imprimir resultados de prueba
▶3-220AH
▶Batería General, batería AGM, batería EFB, batería de gel, etc.
▶Tecnología de conductancia, prueba conveniente, rápida y precisa
Especificación de producto:
1. Aplicación: Batería de motocicleta, batería de coche y batería de camión.
2. Rango de medición de voltaje: 7-30VDC.
Battery Tester 12V Car Digital Alternator 6 LED Lights Display Automotive Diagnostic Tool Auto Load Analyzer Tester For Car
Battery Tester 12V Car Digital Alternator 6 LED Lights Display Automotive Diagnostic Tool Auto Load Analyzer Tester For Car
Alternator state check.
Battery state check.
Battery overload display.
6-LED display, clearly present the alternator and battery state.
Two testing clips for safe and easy operation.
Small size and light weight, convenient to carry.
Fit for car, motorcycle, etc.
Suitable for 12V lead acid batteries, hardtop batteries, discharge batteries and maintenance free batteries heavy duty insulated clamps.
Easy and safe to use, no sparking.
With a good chip inside, not easy to get hot on the surface.
6 LED Lights:
Alternator state check:
First light (red): Fault
Second light (green): Good
Third light (green): Full
Battery state check:
First light (yellow): Middle
Second light (red): Low
Third light (green): OK
Specification:
LED quantity: 6 (2 red, 3 green and 1 yellow)
Material of wire: 0.06square millimeter copper
Max. voltage and current: 12V 15A
Length of wire: 25cm / 9.84in
Battery tester size: 12 * 5.2 * 1.8cm / 4.7 * 2 * 0.7in
Features: Portable
Functions: Improve driving safety
Material : Plastic, Copper
Color : Gray
12V Car Battery Tester Digital Alternator Tester 6 LED Lights Display Car Diagnostic Tool Auto Battery Tester For Car
